A translucent, UV stable dye, formulated using color designed to penetrate exterior and interior cementitious surfaces.
- 28 great color choices in neutral and vibrant variaties
- Very economical way to finish and beautify most types of exterior or interior concrete
- Provides a beautiful mottled effect similar to the likes of acid stains but will not fade under UV rays
- Mixes with Acetone & Penetrating Agent
600 - 700 square feet per gallon
Poly Armour, Liquid Metals and any other 2-part product sold by Deco-Crete Supply is intended for certified professional contractor use only. The installer must have completed our training for the specific system being used. Any person or business that chooses to forgo certified contractor installation and attempts to install these products on a “do it yourself” basis is fully responsible for any mishaps and/or failure of the system during and after the installation process.
Recommended for most cured, unsealed exterior and interior concrete substrates. Do not apply to a floor that has been sealed until all sealer has been completely removed and the concrete is acid etched or diamond ground per ASTM specs. Use an acetone sprayer with a #6 or #8 tip, keeping the tip approximately 24" from the surface. Apply in uniform circular motion, not allowing the dye to puddle. The concrete surface should appear wet for just a few moments when applied properly.
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov