A 70% solids two component polyaspartic aliphatic polyurea utilizing innovative proprietary nanotechnology. It provides a high gloss clear coating.
- Provides ultimate abrasion, impact and wear resistance far exceeding many other applications
- Entire application, in most cases, can be accomplished in just one day
- It's excellent penetrating and bonding capabilities provide many years of durability
- Highly economical considering the days of labor that can be saved by using a one day application
- Recommended for use on interior concrete floors and other cementitious surfacs where a high gloss chemically cured coating is recommended
Mix Ratio
1A:1B
Coverage
200 - 300 square feet per gallon
Disclaimer
Poly Armour, Liquid Metals and any other 2-part product sold by Deco-Crete Supply is intended for certified professional contractor use only. The installer must have completed our training for the specific system being used. Any person or business that chooses to forgo certified contractor installation and attempts to install these products on a “do it yourself” basis is fully responsible for any mishaps and/or failure of the system during and after the installation process.
Preparation
- Any cracks or cuts can be filled with Quik Fix then ground smooth with the substrate
- Substrate must be ground to allow the product to bond correctly
Primer Coat
- Put down 1 coat of Poly Armour 70 with a Micro Plush roller nap then cross roll with a Micro Plush roller nap
Chip Coat/Pigment Coat
- Apply 1 coat of Poly Armour 70 Short Filled & Armour Tint with a Micro Plush roller nap
- When throwing out the chips or quartz, spiked shoes must be worn
- After chip coat has dried a 24" Flexible Blade Smoother will allow you to scrape the excess chips off
Last Coat
- Roll out one more coat of Poly Armour 70 with a Micro Plush roller nap
- You can use a dip and roll method
Tools Needed
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
