A single component modified polyurethane that can be used over concrete, wood subfloor & metal prior to application of any Deco-Crete coating or overlay system.
- Flexible & waterproof isolation layer from subfloor to coating
- Easy to use, self leveling underlayment
- Cost effective way to treat wood subfloor
- No need for metal lathe
Coverage
Should be applied at a rate of 2 gallons per 100 square feet resulting in a 27 ± 2 dry mils membrane
Size
5 Gallon Pail
Disclaimer
Poly Armour, Liquid Metals and any other 2-part product sold by Deco-Crete Supply is intended for certified professional contractor use only. The installer must have completed our training for the specific system being used. Any person or business that chooses to forgo certified contractor installation and attempts to install these products on a “do it yourself” basis is fully responsible for any mishaps and/or failure of the system during and after the installation process.
Floor Flex
Surface Prep
- Sand floor with 80 grit sanding screen, utilizing an orbital floor buffer or equivalent
- Thoroughly vacuum all dust and debris from surface
- Treat all seams and/or surface gaps with Sika 1A (or other approved joint filler)
- Use putty knife to smooth out material
- It is important to have all sub flooring as flat as possible
Mixing & Application
- Equip a drill with a spiral ribbon mixer
- Blend product for 5 minutes until product has uniform gray color
- Pour mixed product onto floor and spread using a 3/16" v-notched squeegee to properly gauge out material at the rate of 40 square feet per gallon
- Back roll immediately with a 3/8" nap roller
- Allow to cure for a minimum of 12 hours at 70-80 degrees F
- Minimum application temperature is 50 degrees F
- If coating has been down for more than 24 hours, you must wipe surface down with xylene before installing any topcoat